Best Kayak Trolling Motor Mount for the money 2022
Kayak fishing is becoming one of the fastest growing trends when it comes to fishing nowadays. Fishing from a kayak allows you the ability to get into those hard to reach places while also giving you the ability to cover a lot of ground in a short period of time. Fishing kayaks are designed for a very specific purpose, allow the angler to hit the water and do a number on some unsuspecting fish.
You can easily go out with just a kayak and a rod and reel and have a great time, but if you’re a serious angler you’ll outfit your kayak like many Jeep owners outfit the Jeeps. Make it look like you’re preparing for battle. There are more bells and whistles for a fishing kayak than there are for most luxury cars nowadays. One of the first things most people end up getting for their fishing kayak is a trolling motor.
With the addition of a trolling motor you’ll also be in need of a trolling motor mount and a marine battery for your trolling motor. These three items are a game changer when it comes to kayak fishing. If you’re on the market for a kayak trolling motor mount, or just trying to find out how to mount a trolling motor on a kayak, you’ve come to the right place.
We’ve done the testing and the comparisons, and here are our results. Here are our picks for the best kayak trolling motor mounts for the money in 2022.
Enjoy Our Review Of Trolling Motor Mounts For Kayaks
|Image||Name||Top Choices||Latest Pricing|
|1. Brocraft Fishing Kayak Trolling Motor Mount Universal|
|2. Brocraft Kayak Trolling Motor Mount For Track|
|3. RAILBLAZA Kayak Motor Mount|
|4. Shoreline Marine Canoe/Kayak Trolling Motor Mount||Amazon|
|5. Watersnake Electric Trolling Motor Kayak Bracket||Amazon|
Pricing of these Kayak Trolling Motor Mounts Range Between $55-$200
Brocraft Fishing Kayak Trolling Motor Mount Universal Review
A trolling motor is one of the best upgrades you can make to your fishing kayak but you’ll need a reliable and easy-to-install mount. The Brocraft Fishing Trolling Motor Mount has a universal design, allowing it to be used with any fishing kayak with built-in dual rod holders.
The rod holders should have holes that are a minimum of 1 1/2 inches in diameter. A special request for a narrower aluminum tube should be made for kayaks with smaller rod holders.
The Brocraft kayak trolling motor mount is made from marine grade alloy and nylon and is specifically designed to fit kayaks with built-in rod holders, which enables it to slide easily into your existing rod holders without the need to modify your kayak in any way – just attach and go!
The mount can be installed within seconds and disconnects just as quickly for easy storage. The clamps included are simple to use and are adjusted by releasing and sliding along the mount to change their position.
The system is composed mostly of marine-grade alloy and nylon, materials that make it durable as well as reliable. Using this trolling motor mount by Brocraft Fishing is easy and no modifications need to be made to your kayak to accommodate it.
Dismantling is just as effortless as installation. It is also adjustable so it can be used with kayaks of almost any hull width and it works with any flush rod holder or inclination. Two rocket launching rod holders are included in the package. Additionally, it can be installed for either left or right-handed use.
This handy accessory is fully customizable for different hull widths and will fit to any angle or inclination flush rod holder. It can also be adjusted for either left or right hand operation. It has some issues as, due to the number of adjustments is has, it can be quite difficult to get it to hold solidly onto a regular kayak.
It is also a little flimsy at times, allowing for a lot of flex at higher speeds. This mount is best used for casual fishing and if you are not going to be traveling at high speed.
- Designed to fit kayaks with rod holder
- Disconnects easily for storage
- Many adjustments to fit all kayaks
- Can be difficult to get a tight hold
- A little flimsy at high speeds
Brocraft Kayak Trolling Motor Mount For Track Review
With a fishing trolling motor, you can up your kayak fishing game and focus more on the fishing and less on the paddling. But before you can use one, you need a good mount that’s not just stable and secure but also well-suited for your kayak. The Bocraft kayak trolling motor mount for track is fully customizable for different hull widths and will fit to any angle or inclination.
It can also be adjusted for either left or right hand operation. This mount slides easily into your existing kayak rod holders without any need for modification, just attach it to your kayak and you’re ready to go!
The mount can be installed within seconds and disconnects just as quickly for easy storage. The clamps that are provides are simple to fit and also adjust by releasing and sliding along the mount to change their position. This trolling motor mount by Brocraft Fishing is made specifically to be used with kayak tracks.
Although it doesn’t come with the tracks themselves, its two aluminum side brackets are meant to fit common tracks not just by Brocraft Fishing but those by other manufacturers as well.
This trolling motor mount is designed to be easy to install and it effortlessly clamps and detaches from gunwales. It is made mostly of durable but lightweight marine-grade aluminum and has nylon fittings for further protection from corrosion. If you have a kayak fish finder you’ll also have the ability to mount it directly to the trolling motor mount.
Its motor mount has a universal design to accommodate almost any electric or gas motor weighing up to 35 pounds. It can also be used with almost any kayak because it can be adjusted to fit any hull width. Each purchase comes with two rocket launcher rod holders.
It has a marine grade aluminum track bar mount with two rocket launcher rod holders. The aluminum mount is extremely tough and also has a two sided nylon to protect the motor clamp. The ability to adapt it means it can be installed on either side of the kayak and is capable of supporting an electric motor of up to 35lb.
It is a little too flexible on the kayaks as it can be quite hard to tighten, and can also take a long time to adjust it to the correct specifications needed. This is a great kayak trolling motor mount kit for the price.
- Fully customizable
- Can be adjusted for either side of kayak
- Marine grade aluminum track bar mount
- Supports up to 35lb
- Very flexible when on the water
- Takes time to adjust to specifications needed
RAILBLAZA Kayak Motor Mount Review
The Railblaza Kayak motor mount is a fast and simple way to mount your motor using minimal effort. It is very easy to clip on and remove from the kayak. Meaning that not only can you get up and go within minutes, you can also safely remove and store your motor after use.
This mount is supplied with two all-mounting fasteners and you can also add other customizations that are provided by Railblaza. These include rod holders, lights, or camera mounts.
This bracket will fit almost all models of kayak, however it does not fit the same range of motors as some others, so carefully consider the specifications of the mount to ensure it is suited to your needs. It does, however, fit the likes of Minn Kota and Watersnake. The instructions provided with this mount are easy to follow and all of the necessary hardware is included, so you can have the bracket attached and your motor mounted in no time. Its an exceptional kayak mount for trolling motors.
Some may consider it an expensive mount for what you get, and it certainly isn’t one that is top of the range. However, if you are looking for a bracket that allows for extra customization, then this is the perfect mount for you.
- Fast and simple to use
- Easy to safely remove and store
- other customizations are available
- Not suitable for all motors
Shoreline Marine Canoe/Kayak Trolling Motor Mount Review
The Shoreline marine kayak trolling motor mount is easy to install and has a pair of secure attachment arms to hold it firmly onto your kayak. This makes the attachment of trolling motors, as well as small gas motors, very simple to achieve. The trolling motor bracket of the Shoreline attaches to your kayak in minutes.
It also holds all types of motors due to its universal mounting brackets. This is suitable for many types of boats, not just kayaks. It can also be used for Jon boats, pontoons, deck boats and even dinghies.
The brackets can be adjusted into four different positions to attach in the way that is best for your motor, and they can also be removed easily when not in use. This is great for the easy care and storage of your mount. It even features a quick release pull knob as well as a 3.4 x 4 inch mounting footprint.
The wood on the mount isn’t the strongest out there so you need to consider the weight of your motor. This also means that the mount isn’t very long-lasting, however, you should be able to get a good amount of fishing from it.
- Easy to install
- Pair of secure attachment arms
- Universal mounting brackets
- Easily removed for storage
- Great kayak trolling mount
- Wood on the mount isn’t very strong
- Not a long-lasting mount
Watersnake Electric Trolling Motor Kayak Bracket Review
The Watersnake Kayak Bracket is designed for use for installing electric motors on kayaks. It provides an infinite angle for the best position when using Watersnake motors and is also compatible with other motors up to a 24lb thrust and 25mm shaft diameter.
Its universal design means that it fits most kayaks and canoes with no further adjustments necessary. It combines a revolutionary design with a lightweight material to create a lovely bracket for your small electric kayak trolling motor. This will give you a great fishing kayak with trolling motor mount.
The instructions provided with this bracket, however, could be better and it takes a long while to figure out how to attach it to your kayak. Once you do get it installed, your motor can be easily attached and then removed for easy storage. This kayak electric motor mount can easily be placed at the bow of your kayak, making it one of the best bow mount trolling motor mount.
Ultimately this bracket is best for use with other Watersnake products. When it is used with a Watersnake motor, its performance is great and it seems sturdy. As it only takes quite a lightweight motor, it is quite flimsy with heavier brands, and may not stand up to a durability test at high speeds.
- Perfect for a Watersnake motor
- Provides an infinite angle of adjustments
- Universal design to mount on all kayaks
- Easy to remove for storage
- Instructions very difficult to understand
- Best for use with Watersnake motors only